Nice bed frame. As described and advertised.
Had trouble with assembly, contacted seller, received reply quickly and they were very helpful in sorting out issue and sending needed replacement parts (bed went through recent design change and we received 1 box from old design and 1 box from new design and there was 2 parts that didnt fit because of change).
Do not use a screw gun to assemble the drawers, the clips will break. If you have nightstands then the two drawers closet to the headboard cannot be used unless you move the nightstands each time. I did not reinforce this as others suggest and it is just fine.
Perfect for your kids as they grow up and the storage removes the need for a dresser in the room completely. Not hard to put together at all just make sure you own a drill.
If anyone is curious, yes, this is the Astrid Twin Headboard along with this platform frame. It was so easy to assemble and it is very sturdy. Im very happy to have bought this.
My kid needed more storage so we got the twin size to replace a princess frame that was no utility, all frill. My husband and I worked on it as a team and it took about six hours, we read carefully and only had to back screws out once. I put all the drawers together myself and squared the frame alone. Will update if anything happens but my kid isnt particularly rowdy so I I dont anticipate problems.
Put it together tonight with my teenage son, took about 4.5hrs. Once we figured out which piece was which it was easy to put together. Wish it had better description on the drawer tracking pieces. So far happy with it. Guess we will see how the 1st night goes.
I have had my bed for about 1 yr. I like my bed a lot because of the storage. I see that its $600 now and that is quite high for particle board, in my opinion. I wanted the storage - thats the only reason I bought this in particle board. I wish it was solid wood but we are happy with it. Basically we sleep on it and its fine and our combined weight is 325 lbs. We reinforced it with brackets all over the place on the inside. The head side of the bed is up against a wall. The bed is a pretty good design and went together well but it took us over 8 hours, including sorting out all the hardware and wood pieces and reading instructions. It came in 4 boxes and it took 6 weeks to complete the delivery - the first one never arrived completely and had to be resent, that was the fault of the carrier. I couldnt begin assembly of what I did receive early because hardware was shipped separately with other components. ( I explained the shipping further, below). The instructions are very good and the hardware is easy to use. My husband is handy and showed me how to put the drawers together and I was able to do them easily. If you can follow instructions and have someone to help with the heavier aspects, anyone can do this. It helps to have a ratcheting screwdriver and a power screw driver. Near the final put together the hardest part was getting the bed/drawers all aligned and screwing down the brackets while keeping the slats from slipping off. There are pilot holes that the brackets screw into that are hardly noticeable. I dont know how anyone would do the final assembly alone (keeping the walls together with drawers in while attaching head and foot) - it really requires two people I think. Once aligned the drawers were almost perfectly flush. I am impressed with the way the bed was engineered, as the only weakness is that its particle board, and also there are some gaps at the head area between the mattress and the head piece. I havent put a headboard up - that is another project. Im not having problems with the slats sliding and dropping out. They are plywood and my husband used angle brackets to secure them in place to the head and foot boards. There are two particle board pieces in the center part of the bed that hold the sides of the bed, and the drawers glide on. The slats could also be anchored to those boards. Overall. I think the bed is more stable with a lot of angle brackets. After that, it would be very difficult to take this bed apart and move itthat is the nature of particle board, but I guess it would be possible if you have wood glue and wood filler. We also put self sticking felt underneath on any area that touched our flooring. This also makes it easier to slide the bed if needed. After reading the reviews I realize the bed cannot be torqued or the particle board would be stressed. Our combined weight is about 315 lbs and we havent had any issues. I think if you reinforce this bed with the angle brackets it will work out okay.
Weve slept on it for two weeks and still plan to go in and do more reinforcement. I will try to update in the future. I would say if you get it and reinforce it, its a decent bed to get more storage especially if you have a smaller bedroom or closet space. However, I dont expect to move this bed and I agree with others, it probably cant be
My bed had some damage that was mostly cosmetic. I got a discount from although not as much as I asked for. The rep didnt tell me exactly the truth either. He said Id get a partial refund for the damage, but instead gave me a promo credit on my account which limits what I can buy on - only items fulfilled by and no gift cards either. I feel this was misleading from what he originally told me.
My delivery experience with UPS was not good. The bed shipped in 4 boxes and UPS lost the 4th heaviest box (over 100 lbs) twice. The first order was lost had to be replaced and then UPS did the same thing. My local driver finally found it in the warehouse and told me about it, saying it was extremely beat up..and do I still want it. I said yes Ive waited 6 wks for it - so he personally had it loaded on his truck and brought it. He is a good driver of course, but the warehouse is run poorly. shipped quickly and it made it to the UPS warehouse in a few days. But that last box.the biggest one, so banged around that the drawer guides were rattling inside, the foam separated. could have taped things together better because the drawer guides and brackets damaged the finish on the bed pretty severely. None of the boards were cracked so that was a plus and the bed is usable.
Reviews
I would buy again if needed
Bought this bed for my daughter and it was very easy to assemble did not take long at all and its extremely sturdy Im a big guy and it can hold me
As advertised and expected
Nice bed frame. As described and advertised. Had trouble with assembly, contacted seller, received reply quickly and they were very helpful in sorting out issue and sending needed replacement parts (bed went through recent design change and we received 1 box from old design and 1 box from new design and there was 2 parts that didnt fit because of change).
No need to reinforce as others suggest.
Do not use a screw gun to assemble the drawers, the clips will break. If you have nightstands then the two drawers closet to the headboard cannot be used unless you move the nightstands each time. I did not reinforce this as others suggest and it is just fine.
Make sure you have a drill
Perfect for your kids as they grow up and the storage removes the need for a dresser in the room completely. Not hard to put together at all just make sure you own a drill.
Perfect Platform
If anyone is curious, yes, this is the Astrid Twin Headboard along with this platform frame. It was so easy to assemble and it is very sturdy. Im very happy to have bought this.
Just what I was looking for
It came earlier than expected and it is beautiful. I love the storage space.
Involved set up, but my kids happy
My kid needed more storage so we got the twin size to replace a princess frame that was no utility, all frill. My husband and I worked on it as a team and it took about six hours, we read carefully and only had to back screws out once. I put all the drawers together myself and squared the frame alone. Will update if anything happens but my kid isnt particularly rowdy so I I dont anticipate problems.
So far so good.
Put it together tonight with my teenage son, took about 4.5hrs. Once we figured out which piece was which it was easy to put together. Wish it had better description on the drawer tracking pieces. So far happy with it. Guess we will see how the 1st night goes.
Ok for the money
Its partical board. I had to add extra hardware to make it more sturdy. Pretty much what I expected
Love the storage. Bed definitely needs reinforcement. Very high if used with a thick mattress.
I have had my bed for about 1 yr. I like my bed a lot because of the storage. I see that its $600 now and that is quite high for particle board, in my opinion. I wanted the storage - thats the only reason I bought this in particle board. I wish it was solid wood but we are happy with it. Basically we sleep on it and its fine and our combined weight is 325 lbs. We reinforced it with brackets all over the place on the inside. The head side of the bed is up against a wall. The bed is a pretty good design and went together well but it took us over 8 hours, including sorting out all the hardware and wood pieces and reading instructions. It came in 4 boxes and it took 6 weeks to complete the delivery - the first one never arrived completely and had to be resent, that was the fault of the carrier. I couldnt begin assembly of what I did receive early because hardware was shipped separately with other components. ( I explained the shipping further, below). The instructions are very good and the hardware is easy to use. My husband is handy and showed me how to put the drawers together and I was able to do them easily. If you can follow instructions and have someone to help with the heavier aspects, anyone can do this. It helps to have a ratcheting screwdriver and a power screw driver. Near the final put together the hardest part was getting the bed/drawers all aligned and screwing down the brackets while keeping the slats from slipping off. There are pilot holes that the brackets screw into that are hardly noticeable. I dont know how anyone would do the final assembly alone (keeping the walls together with drawers in while attaching head and foot) - it really requires two people I think. Once aligned the drawers were almost perfectly flush. I am impressed with the way the bed was engineered, as the only weakness is that its particle board, and also there are some gaps at the head area between the mattress and the head piece. I havent put a headboard up - that is another project. Im not having problems with the slats sliding and dropping out. They are plywood and my husband used angle brackets to secure them in place to the head and foot boards. There are two particle board pieces in the center part of the bed that hold the sides of the bed, and the drawers glide on. The slats could also be anchored to those boards. Overall. I think the bed is more stable with a lot of angle brackets. After that, it would be very difficult to take this bed apart and move itthat is the nature of particle board, but I guess it would be possible if you have wood glue and wood filler. We also put self sticking felt underneath on any area that touched our flooring. This also makes it easier to slide the bed if needed. After reading the reviews I realize the bed cannot be torqued or the particle board would be stressed. Our combined weight is about 315 lbs and we havent had any issues. I think if you reinforce this bed with the angle brackets it will work out okay. Weve slept on it for two weeks and still plan to go in and do more reinforcement. I will try to update in the future. I would say if you get it and reinforce it, its a decent bed to get more storage especially if you have a smaller bedroom or closet space. However, I dont expect to move this bed and I agree with others, it probably cant be My bed had some damage that was mostly cosmetic. I got a discount from although not as much as I asked for. The rep didnt tell me exactly the truth either. He said Id get a partial refund for the damage, but instead gave me a promo credit on my account which limits what I can buy on - only items fulfilled by and no gift cards either. I feel this was misleading from what he originally told me. My delivery experience with UPS was not good. The bed shipped in 4 boxes and UPS lost the 4th heaviest box (over 100 lbs) twice. The first order was lost had to be replaced and then UPS did the same thing. My local driver finally found it in the warehouse and told me about it, saying it was extremely beat up..and do I still want it. I said yes Ive waited 6 wks for it - so he personally had it loaded on his truck and brought it. He is a good driver of course, but the warehouse is run poorly. shipped quickly and it made it to the UPS warehouse in a few days. But that last box.the biggest one, so banged around that the drawer guides were rattling inside, the foam separated. could have taped things together better because the drawer guides and brackets damaged the finish on the bed pretty severely. None of the boards were cracked so that was a plus and the bed is usable.
Add a review